Renovation Toolkit · Guide 02
Sign Off on the Design
Cabinets are built to the design. Before the order is placed, the installer who measured — or who will install — confirms the design matches the site and can be installed as drawn.
Closes the loop the Measurement Guide opens
Purpose
The installer confirms the design will fit and install as drawn — before the order is placed.
When
After site measurements are verified, before the order is placed.
Who
Installer + designer. The installer signs; the designer acknowledges.
The work — confirm each against the site
1
Dimensions
Design dimensions match the verified site measurements.
2
Verticals
Ceiling heights and soffits accounted for.
3
Utilities
Utility centerlines align with the design.
4
Appliances
Appliance sizes confirmed against spec.
5
Clearances
Clearances and door swings work.
6
Flooring
Flooring condition consistent with design assumptions.
Handoff
The signed form goes to your designer. The order proceeds from it.
Escalate
Anything that does not match the site: write it down and request the change before the order is placed. Before the order is the easy time.
This resource is optional and provided for general guidance only. It reflects suggestions based on industry standards. No information is collected or stored through this document, and no responsibility is assumed for its use. All work should be performed by qualified professionals and verified against project-specific documents and site conditions.